Piso Wifi

If your Piso WiFi has a problem with pause time, here are some tips to solve it. Try the factory settings, reset the network, or change the default IP address to see if that fixes the issue. If these suggestions don’t work, try the steps below. We hope this article will be helpful! Enjoy! And remember, if you have any other issues with Piso WiFi, feel free to leave a comment!

Problems with Piso WiFi’s pause time

If you have problems with Piso WiFi’s pause, you may need to reset its IP address. You can do this by visiting the Piso website at, click the “Reset” button, and then restart the device. Then, the pause time should be fixed. However, some solutions might not work for your circumstances. If this doesn’t work, you can also try changing the default portal and gateway.

You can pause Piso WiFi every half an hour, or every 15 minutes, but this is only a solution if you’re using it while you’re at home. If you use it outside of your home, it will force you to connect to another network and pay a visit. However, if you’d rather use the internet at certain times of the day, you can set the pause time to a specific hour. This way, you’ll only be charged if you use the service at certain times of the day.

The pause time feature of Piso WiFi allows you to create a WiFi hotspot for up to four people. This is a great feature for small businesses and travelers because it allows people to browse the internet in peace and not have to worry about the privacy of others. It also comes with a huge database of free WiFi hotspots that you can connect to using the Piso Wifi Pause Time App.

Resetting the network to factory settings

The first step to fixing the Piso WiFi pause time issue is to reset the network to factory settings. To do this, you must unplug your modem from your computer and hold down the “reset” button on the router for ten seconds. The reset should be successful if the reset lights start blinking. Once this process is completed, reconnect your router to the internet and change the default IP address.

Next, go to your network’s admin portal and enter the default username and password. If you do not remember your password, try to access the router by looking on the backside. After that, you should be able to login to the PISO WiFi admin portal. If you are unable to log in, you should clear your browser cache. This will allow you to login to your router again.

If the pause time persists, you should restart the device. You will need to register in the device’s web portal, create a login account, and choose a password. You can also reset the device’s default IP address in the settings menu. Once you have done this, you should see a more responsive internet connection. If you do not want to use the Piso Wifi web portal, you can change its default IP address by following the instructions below.

Changing the default IP address

device, go to the web portal. Click on “Administration” and enter your admin username. Most routers have the default username admin, so make sure to type this in. Now, simply enter the default IP address as written on the web portal. You’ll see a prompt asking you to pause the internet connection while you enter your password.

If your Piso WiFi has difficulty connecting to a public network, try changing the default IP address to another device with the same IP address. This will solve the problem. After making the changes, you’ll be able to access the internet as usual. The IP address has numerous uses and can be used multiple times. The rate management system allows administrators to manage bandwidth, users, and pause time.

Final Words:

The Piso WiFi portal offers easy settings for managing the bandwidth, users, and pause times. When not in use, simply log in and visit the portal page to reconnect. To use the internet again, simply place a coin into the slot on the device and login to the admin portal. You can change the default IP address to the next higher level for a minimal fee.


By Ramzan

Leave a Reply

Your email address will not be published. Required fields are marked *